Hague AMP3 Telescopic Camera Mast With 360° Powerhead & Camranger Camera & Powerhead Controller

AMP2.jpg
AMP_6.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-8.jpg
PH.jpg
PH-2.jpg
TCP-10.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-2.jpg
TCP-8.jpg
camranger_3.jpg
AMP2_2.jpg
TCP-4.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-1.jpg
PH-4.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-9.jpg
AMP2.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-4.jpg
TCP-7.jpg
camranger_4.jpg
camranger_1.jpg
PH-1.jpg
PH-3.jpg
TCP-2.jpg
PH-7.jpg
TCP-12.jpg
AMP2.jpg
AMP_6.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-8.jpg
PH.jpg
PH-2.jpg
TCP-10.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-2.jpg
TCP-8.jpg
camranger_3.jpg
AMP2_2.jpg
TCP-4.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-1.jpg
PH-4.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-9.jpg
AMP2.jpg
REMOTECONTROL-POWERHEAD-CAMRANGER-4.jpg
TCP-7.jpg
camranger_4.jpg
camranger_1.jpg
PH-1.jpg
PH-3.jpg
TCP-2.jpg
PH-7.jpg
TCP-12.jpg

Hague AMP3 Telescopic Camera Mast With 360° Powerhead & Camranger Camera & Powerhead Controller

833.00

Price excludes VAT

The Hague AMP3 kit includes the Telescopic Camera Stand which has a minimum height of 190cm and a maximum height of 730cm. It is supplied with a Hague MPH Modified remote controlled Pan and Tilt Power Head, a TCP Tilt Correction Plate, the Camranger Wireless DSLR Controller and the PT Hub which allows you to control the powerhead through the Camranger application.

APPLICATIONS

Outdoor: As compared with the traditional view, the result is completely different and the image is greatly improved when taken from a higher view point.
It is recommended that you use guide ropes (not supplied) when used outside in windy conditions to stabilize the stand and prevent swaying.

Quantity:
Add To Cart

Indoor: Sometimes you may have to take a picture of a detail that is in an awkward position; it may be too high with bad lighting conditions. The traditional tripod is not high enough and, in some places, heavy duty scaffolding is forbidden.

The Hague MPH Modified Pan & Tilt Powerhead is ideal for still cameras and all handheld camcorders up to 2.7kg. The Power Head may be fastened to a tripod or to any mounting device having a standard ¼"-20 mounting screw and is ideal for use with the Hague PHS Powerhead Stand. 

The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control. This unit can also be used with the Camranger and PT Hub combination and on masts for aerial photography.

SPECIFICATIONS MPH POWER HEAD
Power Source 4 AA Batteries
Vertical Tilt + - 15 Degrees
Horizontal Pan 360 Degrees
Approx. Max. Speed- Vertical Tilt 2.4 Degrees per sec.
Approx. Min. Speed- Vertical Tilt 1.2 Degrees per sec.
Approx. Max. Speed- Horizontal Pan 8 Degrees per sec.
Approx. Min. Speed- Horizontal Pan 4 Degrees per sec.
Auto Pan Settings Not available
Maximum Camera Weight 2.7kg. (6 Ib.)
Size 145x115x103mm (5.75x4.5x4 inches)
Weight (with batteries) 0.9kg. (2lb.)

The Hague TCP Tilt Correction Plate is suitable for Hague PH and MPH Remote Pan & Tilt Power Heads, plus other similar models. Ideal for Aerial mast photography and when the power head is in a high position. The pan & tilt power head has a tilt movement of + & - 15 degrees which is usually fine if the head is mounted to a tripod, but if it is mounted in a high position, such as on the top of a mast for aerial photography or a high wall bracket, you do not usually need the camera to tilt upwards. 

By using the Tilt Correction Plate the camera will start from a horizontal position and tilt down 30 degrees giving an extra 15 degrees of downward movement. The Tilt Correction Plate also has adjustment to move the camera forward or back to correct the centre of balance of SLR cameras with larger lenses.

Size 115 x 64 x 5mm. Weight 100g. 

CamRanger How It Works

CamRanger is a stand-alone device that connects to select Canon or Nikon DLSR cameras with a provided USB cable. It creates an ad-hoc WiFi network that your device (iPad, iPhone, iPod Touch, Android, or Mac or Windows computer) can then connect to. The free CamRanger app then enabled control of the camera. There is no need for a computer or existing Internet connection.

Hardware Details

CamRanger operates on a rechargable, replaceable battery (extra batteries available for purchase). Battery life varies upon usage but 5 to 6 hours is typical; however, in ideal scenarios over 11 hours can be achieved for intervalometer with no device (iPad, iPhone, iPod Touch, Android, or Mac or Windows computer) connected.
Charges with and can be powered by provided USB charging cable and US AC adapter.
Wireless network enables connections up to 150 feet. (Slow connections have been maintained at 300 feet) Comes with protective case for storage and secure attachment. Includes Ethernet cable for firmware upgrades for future enhancements.

Live View

Wirelessly stream live view from the camera to the device.
Double tap to increase magnification.
Single tap to focus on an area or make incremental focus adjustments.
Perform focus stacking. Frame rate of about 8 – 18 fps depending on the camera.

Take and View Pictures

Wirelessly capture images in multiple drive modes.
Thumbnails automatically appear on the top of the screen after taking a picture.
Tap a thumbnail to view the image and its associated meta-data.
Images are always saved to the camera card and optionally downloaded to the device (iPad, iPhone, iPod Touch, Android, or Mac or Windows computer).
Optionally select to have images automatically view on the device.

View Full Resolution Images

Double tap to view the image at full resolution.
Supports full screen mode to maximize the screen size. Toggle a variety of overlays: AF points, highlight, shadow, grid lines, and aspect ratio.

Auto-View

Configure your device to automatically display pictures as they are taken.
Toggle on “Client Mode” to remove camera controls from the device.
Allows others such as clients, directors, or associates to quickly and wirelessly view the shots after they are taken by the photographer at the camera.

Movie Recording

Start and stop movie recording.
View video while recording.
Focus adjustments and touch focusing.
Movie features are very camera dependent, see supported cameras for more details.

Intervalometer and Bulb

Configure as an intervalometer to take time lapse pictures.
Supports bulb mode with typical control and by using custom defined shutter lengths.
No need for your device to remain connected after starting.

View and Set Camera Properties

Shutter Speed
Aperture
ISO
Metering Mode
Drive/Shooting Mode
White Balance
Image Format
Focus Mode (Nikon only)
Auto Exposure Mode (Nikon only)
Exposure Compensation & Bracketing
Software Auto-Focus toggle to toggle AF/MF

HDR / Advanced Bracketing

Configure CamRanger to take a series of pictures automatically varying Shutter Speed, Aperture, or ISO. Images can then be post-processed with 3rd party software.

View Camera Card Contents

View thumbnails of the images on your camera’s memory card.
Select images to be permanently deleted or download them and save into your device’s (iPad, iPhone, iPod Touch, Android, or Mac or Windows computer) photo library. Double tap image to view full resolution image.

Macro Photography

Provides very precise focusing control.
Great for situations requiring awkward camera placements.
Perform automatic focus stacking to enhance depth of field (post processing with 3rd party software required).

Compatible Cameras (Please note not all functionalities work with every camera but the following models are all compatible)
 

Canon DSLR Camera Support

SL1 / 100D | Xsi / 450D | T1i / 500D | T2i / 550D| T3i / 600D | T4i / 650D | T5i / 700D | 40D |50D | 60D | 70D | 7D | 6D | 5D II | 5D III |

1Ds III | 1D III | 1D IV | 1Dx | 1DC

Nikon DSLR Camera Support

D5000 | D5100 | D5200 | D5300 | D90 | D7000 |D7100 | D300 | D300S | D600 | D610 | D700 |D750 | D800 | D800E | D810 | D3 | D3s | D3x |D4 | D4s | Df

The Camranger PT Hub allows you to control the Hague PH or MPH Power Heads wirelessly in conjunction with the Camranger DSLR controller. The power head is controlled through the CamRanger app. An additional tab within the app allows for control of the power head. To control the power head from the iPhone, iPad, Android, Mac or Windows computer the hardware setup requires a CamRanger, CamRanger PT Hub, and a Power Head.

Features

When the CamRanger PT Hub and Power Head are used with the CamRanger, the user can easily pan or tilt the camera from within the CamRanger app. It can be used to generate panoramas and motion controlled time-lapse. It is also possible to incorporate the intervalometer with automated or manual pan/tilt programing allowing for more customization. It is ideal for video recording or photography.

How it Works

To control the power head from the iPhone, iPad, Android, Mac or Windows computer the hardware setup requires a CamRanger, CamRanger PT Hub, and a power head.The power head is controlled through the CamRanger app. An additional tab within the app allows for control of the power head. The power head connects to the CamRanger, CamRanger PT Hub, and DSLR camera to allow wireless control of the camera and movement of the camera.


Related Products