Hague AMP Highshot Camera Mast 7.3m With Padded Transit Bag
Hague AMP Highshot Camera Mast 7.3m With Padded Transit Bag
Price excludes VAT
The Hague AMP Highshot Camera Mast is a lightweight system that extends to a height of 7.3m (24ft) and is ideal for a variety of applications including aerial mast photography, sports analysis, site surveys and sports filming. Supplied in a padded transit bag.
Made from lightweight aluminium this mast is extremely portable, quick to set-up and easy to use. With its own tripod style base, which remains attached at all times and just folds up for transport, the mast provides a rigid base and each section of the mast can be raised easily by hand.
At the top of the mast there is a standard 1/4” screw attachment to which you would usually attach a ball head, tilt head or powerhead so the camera can then be positioned to the desired angle. Once the camera is in position you can then use a tablet or viewing monitor to see and control your images.
Operating from a higher view point drastically changes the picture you can capture and these masts can be utilised outdoors or indoors depending upon the application they are needed for.
The mast now has three adjustable legs for levelling off, a supplied spirit level and there is an attachment at the top to secure guide ropes if required.
With this mast, you can build your own bespoke solution utilising the related products below or just use the mast by itself. Take your filming/photography capability to new heights with the AMP Camera Mast from the UK’s leading solutions expert.
This AMP kit includes the Hague AMP Highshot Camera Mast supplied in a padded transit bag.
Product Specifications:
Maximum Mast Height – 7.3m (24ft)
Retracted Mast Height – 170cm (5.6ft)
Weight – 10kg
Material – Lightweight Aluminium
Max Payload – 3kg
Hague Camera Supports | Nottingham | England
RELATED PRODUCTS
Price excludes VAT
The Hague PH Pan & Tilt Power Head is ideal for still cameras and handheld camcorders. This electronic motorized Pan & Tilt Power Head is suitable for both still photography and all camcorders that weigh less than 2.7kg.
The Power Head may be fastened to any tripod or to any mounting device having a standard ¼"-20 mounting screw and is ideal for use with the Hague PHS Powerhead Stand. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.
An Auto Pan mode with 3 settings can be used for surveillance work, this pans the camera left and right continuously. This unit can also be used with the Camranger and PT Hub combination and on masts for aerial photography.
SPECIFICATIONS PH POWER HEAD
Power Source 4 AA Batteries
Vertical Tilt + - 15 Degrees
Horizontal Pan 340 Degrees
Approx. Max. Speed- Vertical Tilt 2.4 Degrees per sec.
Approx. Min. Speed- Vertical Tilt 1.2 Degrees per sec.
Approx. Max. Speed- Horizontal Pan 8 Degrees per sec.
Approx. Min. Speed- Horizontal Pan 4 Degrees per sec.
Auto Pan Settings 45, 90, or 340 Degrees
Maximum Camera Weight 2.7kg. (6 Ib.)
Size 145x115x103mm (5.75x4.5x4 inches)
Weight (with batteries) 0.9kg. (2lb.)
Price Includes the PH Remote Pan & Tilt Powerhead 340 degress which is supplied with a standard remote control and a 6m extension cable. Does not include AA batteries, tripod, wall bracket or camera, all pictured for illustrative purposes.
Price excludes VAT
The Hague TCP Tilt Correction Plate is suitable for the Hague PH and MPH Remote Pan & Tilt Power Heads, plus other similar models. It is ideal for Aerial mast photography and when the power head is in a high position.
What's it for ?
The pan & tilt power head has a tilt movement of + & - 15 degrees which is usually fine if the head is mounted to a tripod, but if it is mounted in a high position, such as on the top of a mast for aerial photography or a high wall bracket, you do not usually need the camera to tilt upwards. By using the Tilt Correction Plate the camera will start from a horizontal position and tilt down 30 degrees giving an extra 15 degrees of downward movement. The Tilt Correction Plate also has adjustment to move the camera forward or back to correct the centre of balance of SLR cameras with larger lenses.
Size 115 x 64 x 5mm.
Weight 100g.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
The Hague Sandbags are an ideal counterweight when using Camera Masts for added security and safety. The bags can be positioned at the bottom of the mast legs or can be used to attach guy ropes to when using the mast on hard ground.
Supplied as a set of 3.
Price excludes VAT
The Hague Camera Rain Cover is deigned to protect small handheld cameras from the elements when filming outside. It is an ideal way to protect your camera when used on one of the Hague Highshot camera masts or a traditional tripod.
It can also drop down to cover the Hague Powerhead when filming with a camera and powerhead set-up. It is often used with Hague camera masts for filming sports.
Price excludes vat.
The Hague Pole Clamp with Ball Levelling head can be mounted to any tube, pipe or pole with a diameter of 35 to 51mm and is an ideal way of mounting a monitor, tablet or phone to one of the Hague Highshot Poles or lightweight camera masts.
The pole clamp is supplied with 3 adaptor sleeves, which enable the clamp to be used on poles and masts with a diameter of 35 to 51mm.
Depending on the poles diameter, 1, 2 or 3 sleeves would be used, these simply clip onto the pole. Once attached, the clamp is then fitted on top of the sleeves securing it to the pole.
Supports unto 1.5kg.
Suitable for the Hague Highshot Poles (HP1, HP2, HP3) and the Hague Highsot Camera Masts (AMP, AMP1, AMP2, AMP3).
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes vat.
The Hague Cable Cleats are an ideal way of controlling your cables when using one of the compatible Hague camera masts. They simply attach to the locking screw on each telescopic arm section and the cables can then be fed through as the mast is raised.
Sold as a set of 5.
Suitable for the following Hague Camera Masts - AMP, AMP1, AMP2, AMP3.
Price excludes VAT
The Hague SC4 Superclamp with Articulating Arm is an ideal solution for mounting a monitor to a variety of items and it can also be used in conjunction with phone and tablet holders or as a support for small lightweight cameras such as GoPro.
The Superclamp is a robust clamp that will attach to both flat and tubular surfaces measuring between 12mm - 55mm in width. The Articulating Arm attaches to the Superclamp via a standard 1/4" thread and at the opposite end is another standard 1/4" thread which can be screwed directly into the monitor or tablet/phone bracket.
The Hague Articulating Arm is 11" (28cm) long and can be moved into a variety of positions so you can get the monitor or small camera into the desired position.
Price excludes VAT
The Hague Universal Pro Tablet Mount has been designed to hold most types of modern, slim tablets including the new iPad Pro. It enables the tablet to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
With these tablets, such as the Apple iPad, having such good cameras in them, with the facility of being able to record good quality video, it makes sense to be able to mount them to a tripod or other mount to hold the tablet steady.
The mount has two V shaped sections that hold the tablet in a horizontal position. The mounts height is adjustable from 60mm (2 3/8") to 228mm (9") and accepts most modern slim tablets that are rounded on their edges. If the tablet has square edges, the width must not exceed 12mm.
Price excludes VAT.
The Hague Guy Ropes are a great way of adding additional support to the Hague AMP Highshot Camera Mast. Supplied in a set of three they simply clip onto the top guy rope plate and are then pulled out to the desired position, adjusted and secured to the ground using the supplied pegs.
Using guy ropes is a great way to reduce the risk of sway, especially in open spaces where the mast could be affected by the wind.
Suitable for the Hague AMP, AMP1, AMP2 and AMP3 Highshot Camera Mast.
Set of three guy ropes with clip attachment to the mast and pegs for securing into the ground.
Price excludes VAT
The Hague Universal Phone Mount has been designed to hold most types of modern, slim smart phones or iPods in a horizontal position. It enables the phone to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
With these smart phones having such good cameras in them, with the facility of being able to record good quality video, it makes sense to be able to mount them to a tripod or other mount, to hold the phone steady.
The mount has two V shaped sections that holds the phone in a horizontal position. The height is adjustable up to 90mm and accepts most modern smart phones that are rounded on their edges. If the phone has square edges, the width must not exceed 12mm. The Universal Phone Mount is not plastic, it's made of machined aluminium with a thumb screw for adjustment.