Hague E1000/HPS Camslide Easyglide 1000 With Powerslider

E1000-HPSE-20.jpg
E1000-HPSE-14.jpg
E1000-HPSE-3.jpg
E1000-HPSE-2.jpg
HPS_3.jpg
HPS-24.jpg
E1000-HPSE-5.jpg
E1000-HPSE-8.jpg
E1000-HPSE-6.jpg
HPS-23.jpg
E1000-HPSE-17.jpg
HPS_5.jpg
E1000-HPSE-1.jpg
E1000-HPSE-7.jpg
E1000-HPSE-9.jpg
E1000-HPSE-19.jpg
HPS_7.jpg
E1000-HPSE-12.jpg
E1000-HPSE-18.jpg
E1000-HPSE-10.jpg
HPS-22.jpg
E1000-HPSE-11.jpg
E1000-HPSE-15.jpg
E1000-HPSE-16.jpg
E1000-HPSE-20.jpg
E1000-HPSE-14.jpg
E1000-HPSE-3.jpg
E1000-HPSE-2.jpg
HPS_3.jpg
HPS-24.jpg
E1000-HPSE-5.jpg
E1000-HPSE-8.jpg
E1000-HPSE-6.jpg
HPS-23.jpg
E1000-HPSE-17.jpg
HPS_5.jpg
E1000-HPSE-1.jpg
E1000-HPSE-7.jpg
E1000-HPSE-9.jpg
E1000-HPSE-19.jpg
HPS_7.jpg
E1000-HPSE-12.jpg
E1000-HPSE-18.jpg
E1000-HPSE-10.jpg
HPS-22.jpg
E1000-HPSE-11.jpg
E1000-HPSE-15.jpg
E1000-HPSE-16.jpg

Hague E1000/HPS Camslide Easyglide 1000 With Powerslider

370.00

Price excludes VAT

The Hague E1000/HPS-E Package consists of the Hague E1000 Camslide Easyglide with the HPS-E Powerslider. The camera slider can then be used either with or without the Powerslider unit. 

The Hague Camslide Easyglide 1000 is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table, or on the floor for low shots. The camera can be fastened directly to the carriage, or an optional Video or Ball Levelling Head can be used between the camera and carriage, this enables the camera angle to be adjusted.

KEY FEATURES - Extra wide track and carriage for extra stability. - Carriage with internal bearings for superior alignment and smoother movement, plus mounting holes for accessories. Supports up to 8kg.

Quantity:
Add To Cart

The Camslide Easyglide 1000 has a 1000mm rail. Should you require a longer length the optional Rail Connector enables the track to be joined together. The track is 80mm wide with both 1/4" and 3/8" mounting holes in the centre on both rails and also at each end on the 1000mm rail, this enables the track to be mounted on the head of a tripod or directly onto the legs of the tripod. For extra stability the 1000mm track can be mounted across two tripods using the mounting holes at each end of the track.

Two Rail Supports are also supplied, one for each end of the track, which support the Cam-Slide track when it is used on a table or the floor and also prevents the carriage from coming off the end of the track. Optional Rail Supports with 4 self aligning adjustable feet are also available.

The Carriage is 105mm wide and 100mm long, it is this extra width that gives the carriage much more stability and smoother movement than other sliders on the market. The 4 low friction bearings on this carriage are not "bolted on", they are incorporated within the carriage, this prevents any miss alignment or any accidental knocks that can easily send external bearings out of alignment making the carriage stiff to move. We have also decided not to incorporate Hybrid Roller Bearings into the carriage as they are prone to picking up dirt and grit off the track, preventing smooth movement if the track it is not kept clean.

The carriage has a 1/4" screw in the centre to mount the camera to the carriage, also supplied is a stepping collar to convert the camera screw to 3/8" should you wish to mount a head that has a 3/8" threaded mounting hole. There is also a second hole for a head to be attached using a 3/8" screw. At each corner of the carriage are 4 threaded holes, 3 x 6mm and 1 x 1/4", these can be used to mount an articulated arm for a monitor or any other accessory. Also on this top plate is a mounting hole for the Hague Power Slider's drive cable. On the side of the carriage is a thumb screw to lock the carriage in a fixed position or it can also be used to add drag to the movement.

Once the camera is mounted onto the carriage you can create super smooth tracking shots as you slide the carriage down the track. The track is 1000mm ( 39.5" ) long, giving a maximum camera movement of 900mm ( 35.5 " ). Suitable for all camcorders and cameras, supports up to 8kg when used on the ground, table or across two tripods. The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 1000mm. Width 80mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 105mm. Camslide Easyglide Kit 1000 includes:- 1000mm Track, 2 End Supports, Carriage with lock and Camera Screw.

The Hague Power Slider enables you to upgrade your Hague Camslide, Glidetrack SD/HD or Igus camera slider to a motorized version. The Power Slider gives you much better control, creating much smoother camera movement than can be achieved by pushing the carriage by hand.

The variable speed controller enables the camera to go smoothly from a still position up to a required speed by turning the control knob, the knob can then be turned back until the carriage comes to a stop at the required stop position. The carriage can be controlled in either direction. The drive cable supplied with the unit is suitable for 1 metre length rails, if the rail's length is less than 1 metre the cable can easily be shortened to suit. An optional longer drive cable is available for rails between 1 to 2 metres. The controller requires a power supply of 6 - 12v DC depending on the speed range required. A UK mains adapter is supplied with the Power Slider which can be used at 6v, 9v or 12volt, this gives a good range of speeds.

Weight Limit: - When the track is in a horizontal position the Power Slider's motor will move the carriage along the rail/track with a maximum load of 5kg, or 12kg if the carriage has hybrid bearings. (This is total weight on the carriage, camera plus head.) Please note the motor drive is not silent, so the camera's onboard microphone is likely to pick up the sound of the motor, especially at the higher speeds.

THE CARRIAGE Approximate speeds powered at 6v and 12volt. Distance the carriage will travel, per second, when powered at 6 volts - Set at minimum speed 1.6mm. Set at maximum speed 54.6mm. Distance the carriage will travel, per second, when powered at 12 volts - Set at minimum speed 12.6mm. Set at maximum speed 112mm. The speeds are variable from minimum to maximum and the supplied mains adapter can be set at either 6v, 9v or 12volt.

The unit is supplied with a drive cable suitable for 1m length rails and this can be shortened if required for shorter length rails.

Designed and manufactured by Hague Camera Supports | Nottingham | England


Related Products