Hague K11 Compact Camera Jib
Hague K11 Compact Camera Jib
Price excludes VAT
The Hague K11 Compact Camera Jib is so small & compact it can be taken almost anywhere with ease. The Camera Crane has been specifically designed to be lightweight and simple to set up, allowing you to enhance your video productions by getting those beautifully professional looking crane shots.
The jib is supplied in two parts which are only 800mm (31 ½”) long. These slot together (no tools required) to create a jib that has a vertical crane movement that will lift your camera from ground level to a height of 2.6 metres (8ft 6”).
It mounts directly to the tripod’s head in the same way as you would mount your camera and it can be held by both ¼” and 3/8” camera screws. The jib uses the tripod’s head for pan movement which allows the jib to smoothly pan from side to side and move round through 360 degrees. Locking the tilt on the tripod video head ensures the camera will remain level as the jib is raised up and down.
It has a maximum crane movement of 2.6 metres (8ft 6”), which is far greater than other jibs in this class and price bracket. A standard bar weight or a sandbag can be used for counterbalance (not supplied). The telescopic counterbalance bar can be adjusted to get the correct balance to match your camera’s weight.
The ideal camera weight is between 0.5kg to 2kg, but the jib will support up to 2.5kg when mounted to a suitable tripod or it could be mounted to the K11S - Stand which we sell as an optional extra please see below.
Specifications
Maximum up & down crane movement 2.6m (8ft 6”)
Pan radius – distance from tripod to camera 1.6m (5ft 3”)
Supports up to 2.5kg
Closed length 80cm (31 ½”)
Weight 2.4kg (5 ¼ lbs)
Material – lightweight aluminium
Colour – Black
Transit size – L860 x W120 x D60 mm
All sizes and weights are approximate.
Price includes K11 Compact Camera Crane only. The price does not include the tripod, stand, camera, weights or any other accessories shown.
Designed and manufactured by Hague Camera Supports | Nottingham | England
RELATED PRODUCTS
Price excludes VAT
The Hague Compact Camera Crane Stand is ideal if you do not have a suitable sturdy tripod to mount the K11 Jib on.
It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm. The column can be locked at the required height and there is a safety pin to prevent the column slipping.
The stand is made from lightweight aluminium.
Transit size - 106 x 12 x 12cm.
Weight - 3.5kg.
Colour - Black.
Price includes the K11S Compact Crane Stand, the price does not include the K11 Compact Camera Crane - Jib or any other accessories shown.
Designed and manufactured by Hague Camera Supports | Nottingham | England
The Hague Articulating Arm is ideal when used with the Nano Clamp or the Hot Shoe Adaptor to mount a monitor, sound recorder or other accessory to a tripod leg or the shoe of the camera. If the Arm is attached to the Nano Clamp it can be used to fasten a small camera to cycle, pole, table edge, etc.
The Arm will support up to 1kg. It has 1/4-20 studs on both ends. All pivot points are locked by a single handwheel.
Length (arms without threads): 8.3" (21.08 cm)
Weight: 0.45 lbs (206 grams)
Price excludes VAT
The Hague Universal Pro Tablet Mount has been designed to hold most types of modern, slim tablets including the new iPad Pro. It enables the tablet to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
With these tablets, such as the Apple iPad, having such good cameras in them, with the facility of being able to record good quality video, it makes sense to be able to mount them to a tripod or other mount to hold the tablet steady.
The mount has two V shaped sections that hold the tablet in a horizontal position. The mounts height is adjustable from 60mm (2 3/8") to 228mm (9") and accepts most modern slim tablets that are rounded on their edges. If the tablet has square edges, the width must not exceed 12mm.
The Soft Padded Bag is an affordable and practical transit bag that will protect and carry around your equipment. It is an ideal solution for the Hague SM3, SM8 or SM11 Car Suction Mount Kits, the Hague PHS Powerhead Stand, the Hague K3 or K11 Camera Jibs, the Hague TVS Monitor/LCD stand.
It includes a removable internal divider which can be used to separates the bag into two padded compartments if required. The BAG110 offers your equipment enhanced protection during transportation.
Price excludes VAT
The Hague Universal Phone Mount has been designed to hold most types of modern, slim smart phones or iPods in a horizontal position. It enables the phone to be mounted to a tripod or any other mount that uses the standard 1/4" camera screw.
With these smart phones having such good cameras in them, with the facility of being able to record good quality video, it makes sense to be able to mount them to a tripod or other mount, to hold the phone steady. The mount has two V shaped sections that holds the phone in a horizontal position. The height is adjustable up to 90mm and accepts most modern smart phones that are rounded on their edges. If the phone has square edges, the width must not exceed 12mm. The Universal Phone Mount is not plastic, it's made of machined aluminium with a thumb screw for adjustment.
Price excludes VAT
The Hague PH Pan & Tilt Power Head is ideal for still cameras and handheld camcorders. This electronic motorized Pan & Tilt Power Head is suitable for both still photography and all camcorders that weigh less than 2.7kg.
The Power Head may be fastened to any tripod or to any mounting device having a standard ¼"-20 mounting screw and is ideal for use with the Hague PHS Powerhead Stand. The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control.
An Auto Pan mode with 3 settings can be used for surveillance work, this pans the camera left and right continuously. This unit can also be used with the Camranger and PT Hub combination and on masts for aerial photography.
SPECIFICATIONS PH POWER HEAD
Power Source 4 AA Batteries
Vertical Tilt + - 15 Degrees
Horizontal Pan 340 Degrees
Approx. Max. Speed- Vertical Tilt 2.4 Degrees per sec.
Approx. Min. Speed- Vertical Tilt 1.2 Degrees per sec.
Approx. Max. Speed- Horizontal Pan 8 Degrees per sec.
Approx. Min. Speed- Horizontal Pan 4 Degrees per sec.
Auto Pan Settings 45, 90, or 340 Degrees
Maximum Camera Weight 2.7kg. (6 Ib.)
Size 145x115x103mm (5.75x4.5x4 inches)
Weight (with batteries) 0.9kg. (2lb.)
Price Includes the PH Remote Pan & Tilt Powerhead 340 degress which is supplied with a standard remote control and a 6m extension cable. Does not include AA batteries, tripod, wall bracket or camera, all pictured for illustrative purposes.
Price excludes VAT
The Hague MB/A monitor bracket is suitable for the following Hague Jibs & Cranes K2/K9/K10/K11/K12/K14/K16DV/K18. For LCD monitors with a single 1/4" fixing hole in the base.
Price excludes VAT
The Hague PH100 Mini Remote Control Pan & Tilt Camera Powerhead version 2 is ideal for small handheld camcorders, compact cameras, small DSLRs, miniature cameras and action cameras such as the GoPro.
The Powerhead can be mounted to a tripod, jib, crane, beam or wall bracket either vertically or underslung and it supports up to 1kg. It is supplied with a control box which allows the user to adjust the speed and direction of the head with the capability to pan & tilt through 360°.
Pan & Tilt Powerhead
The Hague PH100 Powerhead will pan and tilt through 360 degrees, this enables the camera to point directly up or down as required. It is powered by two powerful geared motors, with the camera’s tilt being belt driven, and this ensures the head provides a very smooth movement with minimum backlash.
Price excludes VAT
The Lilliput 339GL HD monitor is a 7 inch 16:9 LCD field monitor optimised for DSLR camera systems. Using a built in battery pack and a high definition IPS screen this model is the natural successor to the popular 668GL monitor featuring the newest available IPS screen panel for crisp native HD picture on a 7" panel.
7” IPS monitor with widescreen
The Lilliput 339 monitor has an ultra high resolution, widescreen IPS type LCD. This crisp display makes it all the easier to review your data
IPS screen gives 720p native resolution
The 339 features an ultra high native resolution of 1280x800 pixels with intelligent scaling applied when receiving higher resolution HDMI signals. This high resolution gives an extremely detailed image potentially avoiding problems in the post-production environment making it an ideal choice for the discerning professional user.