Price excludes VAT

The Hague D9 Table Dolly enables you get tracking shots on a table, board or any smooth surface. The high quality 80mm diameter wheels have twin sealed radial ball bearings, which make the table dolly easy and quiet to move. The dolly will track in a straight line or it can be set to track in an arc, to go round an item.

On top of the dolly is a 75mm bowl, this enables you to transfer your “75mm bowl type” video head from your tripod onto the dolly and level it off on the bowl mount. You then have the facility to be able to both pan and tilt whilst tracking the dolly. The large footprint of the dolly prevents tipping or slipping when using the video head. It's ideal for both DSLRs and camcorders.

An articulated arm, for a monitor or other accessory, can be fastened to the dolly using one of the table dollies 1/4” or 3/8” threaded mounting points.

Price excludes VAT.

The Hague 75mm Tripod Extender raises the height of your tripod by almost ½ a metre. This makes it ideal for those situations when you would like to get a bit more height on your tripod, such as when you want to get a shot over the top of people who are standing or in any awkward locations where a bit more height would create a much better shot.

The Tripod Extender has been designed for use with pro tripods that use the bowl levelling system. There are two versions the Tripod Extender, TE75 for tripods with a 75mm levelling system or TE100 for a 100mm levelling system.

The Hague Tripod Extender is quick and simple to attach, you simply remove your head from the tripod and mount the extender in it’s place. The video head is then attached to the bowl on top of the extender in the same way as it was fastened to your tripod. The video head can then be levelled off in the usual way.

Specification

Version - 75mm Bowl System

Material – Powder Coated Aluminium

Colour - Black

Height - 450mm (Approx 18”)

Width - 126mm (Approx 5”)

Weight – 1.39kg

Price includes the Hague Tripod Extender with 75mm bowl. Price does not include the tripod, camera, video head or any other accessories shown. 

Designed and manufactured by Hague Camera Supports | Nottingham | England

Price excludes VAT

The Hague 75mm Bowl can be used to replace the 100mm Bowl used on several of our products. This enables a video head with a 75mm levelling system to be used without the need of a stepper ring.

Suitable for products such as our 100mm Bowl Mounts LH100, CBM, BMS, BM, THM, BM100. Dollies HTD, D2, D7, D8. Jibs K12, K14.

Designed and manufactured by Hague Camera Supports | Nottingham | England

Price Excludes VAT.

The Hague 75mm Bowl Mount with superclamps attaches to any horizontal pole, roll bar, scaffolding, ladder run, table edge or similair that is between 12mm - 55mm.

It is held in position by two superclamps, the jaws of the clamps will attach to a pipe/tube between 12 to 55mm in diameter or to a table/beam with a maximum width of 25mm.

The 75mm bowl gives a rigid platform onto which you can attach your video head. It's ideal for use in locations where it is impossible to use a tripod, such as on ladders or step ladders to get that high shot or on railings or scaffolding bars.

Price includes:- 75mm Bowl Mount with Two Superclamps.

Price excludes VAT

The Hague THM75 Twin Head Camera Mount enables two video heads to be mounted to one tripod, making it ideal for a two camera shoot where space is limited. One operator can use one camera for a “wide shot” while using the main camera to follow the action.

With both cameras being so close together the operator can use the flip out screens on the cameras to monitor both shots. This makes it ideal for stage shows, conferences, weddings etc.

The mount will attach to any pro tripod with a 100mm or 75mm bowl. It has a 75mm bowl at either end making it easy to level off the video heads. The video head from the tripod can be used at one end of the mount and a second head can be mounted to the other end, which we can supply if required.

Price excludes VAT

The Hague dual purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object. 

The Hague Skater Ladder Dolly also runs on a ladder to create tracking shots over any terrain.

The high quality wheels have sealed radial ball bearings to ensure super smooth movement. Your video head can easily attach to the dolly as it now has both a 75mm and a 100mm bowl mount included. This means you can simply remove the head from your tripod and mount it on the dolly, with the facility to level off the head. The 75mm and 100mm bowl levelling systems have now become the most popular on the majority of professional tripods.

When the dolly is mounted onto a ladder an extra set of guide wheels are used to prevent it from coming off the ladder and the dolly’s width is adjustable to accommodate the different widths of ladder.

Price excludes VAT

Ideal for camera sliders, or for mounting a tripod head to a table, bench, dolly or board. 

The Hague 75mm Low-Hat enables you to get very low shots using your existing video head from your tripod. The bowl mount accepts most heads using this popular 75mm levelling system with a short locking handle.

The Low-Hat has a 3/8” threaded hole in the centre of its base, making it easy to attach to a camera slider or to a telescopic column of a compatible tripod. It also has three evenly spaced mounting holes to secure it to a step ladder, apple-box, dolly or a sheet of wood.