Hague CSLID Camslide Camera Slider Rail

CSLID.jpg
HAGUE-SLIDER-RAIL-TRIPOD-8.jpg
CSLID-6.jpg
HAGUE-SLIDER-RAIL-TRIPOD-1.jpg
CSLID-7.jpg
CSLID-5.jpg
HAGUE-SLIDER-RAIL-TRIPOD-5.jpg
CSLID-14.jpg
CSLID-3.jpg
HAGUE-SLIDER-RAIL-TRIPOD-7.jpg
58C-7.jpg
CSLID-1.jpg
HAGUE-SLIDER-RAIL-TRIPOD-3.jpg
CSLID-11.jpg
HAGUE-SLIDER-RAIL-TRIPOD-9.jpg
CSLID-13.jpg
CSLID-8.jpg
HAGUE-SLIDER-RAIL-TRIPOD-10.jpg
CSLID-2.jpg
CSLID-10.jpg
HAGUE-SLIDER-RAIL-TRIPOD-6.jpg
CSLID-4.jpg
HAGUE-SLIDER-RAIL-TRIPOD-2.jpg
58C-6.jpg
HAGUE-SLIDER-RAIL-TRIPOD-4.jpg
CSLID-9.jpg
CSLID-12.jpg
CSLID.jpg
HAGUE-SLIDER-RAIL-TRIPOD-8.jpg
CSLID-6.jpg
HAGUE-SLIDER-RAIL-TRIPOD-1.jpg
CSLID-7.jpg
CSLID-5.jpg
HAGUE-SLIDER-RAIL-TRIPOD-5.jpg
CSLID-14.jpg
CSLID-3.jpg
HAGUE-SLIDER-RAIL-TRIPOD-7.jpg
58C-7.jpg
CSLID-1.jpg
HAGUE-SLIDER-RAIL-TRIPOD-3.jpg
CSLID-11.jpg
HAGUE-SLIDER-RAIL-TRIPOD-9.jpg
CSLID-13.jpg
CSLID-8.jpg
HAGUE-SLIDER-RAIL-TRIPOD-10.jpg
CSLID-2.jpg
CSLID-10.jpg
HAGUE-SLIDER-RAIL-TRIPOD-6.jpg
CSLID-4.jpg
HAGUE-SLIDER-RAIL-TRIPOD-2.jpg
58C-6.jpg
HAGUE-SLIDER-RAIL-TRIPOD-4.jpg
CSLID-9.jpg
CSLID-12.jpg

Hague CSLID Camslide Camera Slider Rail

125.00

Price excludes VAT

The Hague Camslide is quick and simple to set up and it can be mounted to any sturdy tripod or placed on a table or the floor for low shots. Either a ball levelling head or a tripod video head (both optional extras) can be attached to the carriage which would allow you to set the camera to the desired position. If you are using a video head it would also allow you to pan and tilt the camera as you moved it along the rail. Both 1/4” and 3/8” threaded heads can be attached to the carriage, or you can mount the camera directly onto the carriage.

Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track.

The track is 1 metre long and can be supported in various ways, there are 3/8” threaded mounting holes in each end, and one in the centre of the track to mount it directly to a tripod or across two tripods. Two 1/4" to 3/8" stepping bushes are supplied should the tripod have a 1/4" stud. 

Quantity:
Add To Cart

The track is 1 metre long and can be supported in various ways, there are 3/8” threaded mounting holes in each end, and one in the centre of the track to mount it directly to a tripod or across two tripods. Two 1/4" to 3/8" stepping bushes are supplied should the tripod have a 1/4" stud. Two track supports are also supplied for each end of the track, these support the Camslide when it is used on a table or the floor and also prevent the carriage from coming off the end of the track. Suitable for all cameras up to 2.5kg.

The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust. Track:- Length 1000mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.5kg.

Price includes:- Camslide CSLID rail, carriage and standard end supports. Price does not include a ball head, the camera, a tripod, a tripod head or any other accessories shown.


Related Products