Hague D5T Camera Tripod Tracking Dolly Kit
Hague D5T Camera Tripod Tracking Dolly Kit
Price excludes VAT
The Hague D5T Tripod Tracking Dolly Kit is a quick and easy to use system that has been designed to create super smooth tracking shots with your own tripod. The dolly has two sets of locating holes for the tripod legs which means the tripod can be used in both high and low positions.
It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. As a result the track does not require additional supports going between the two sides of track which makes it quicker to set-up and also allows the dolly to pull the track into place which makes it run smoother.
The D5T Tripod Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through the majority of doorways and it has its own levelling system which prevents any rocking should the track be on slightly uneven ground.
It runs on 40mm diameter track and is supplied with eight 1.5m lengths which provides a 6m run. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader and 3 straps are supplied for securing your tripod to the dolly.
Size:- L770mm x W620mm x H70mm. Weight:- 3kg. Transit size:- 770mm x 180mm x 180mm.
Price includes the Hague Tracking Dolly, 3 straps, 6 track connectors & 12 metres of track (8 x 1.5m = 6 metre run)
Price does not include the tripod, camera, video head, jib, spiked foot shoes, 3/8” Tristar Handwheel and stud or any other accessories which may be shown for illustration purposes in pictures or videos.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Related Products
Price excludes VAT
Hague Spiked Foot Shoes. Set of 3 shoes with clamps which are suitable for most Manfrotto, Libec and Vinten tripods with twin spiked feet.
Price excludes VAT
Extra track for the Hague D5 Tripod Tracking Dolly - 2 x 1.5 metre lengths.
Price excludes VAT
This quality 3/8” Tristar Handwheel is made from high impact thermoplastic with a brass 3/8” threaded insert. This Handwheel is supplied with a piece of steel 3/8” threaded studding which can be used to attach a tripod head to a table etc. The 3/8” studding is the same thread size as used in the base of most tripod heads.
Size 3/8” – A60mm, B18mm, C19mm, D12mm, E30mm.
Material: High impact resistant thermoplastic
Colour: Black
Finish: Matt
Female Insert Material: Brass
Stud size: Thread 3/8” Length 3” (78mm)
Material: Steel
Finish: Natural
Price includes the 3/8” Tristar Handwheel With Stud.
Price does not include the Hague D5T Tripod Tracking Dolly, the video head, the camera or any other accessories shown for illustration purposes.
Price excludes VAT
Extra track connectors for Hague D5 Tripod Tracking Dolly.
Set of two.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
Soft padded transit bag with carrying straps suitable for the D5 Tripod Tracking Dolly Kit, K14 Pro Jib, K16DV Camcrane.
Colour - Black