Hague HCST Camslide Traveller Camera Slider Rail

HCST.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-8.jpg
HCST-1.jpg
HCST-2.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-3.jpg
HCST-7.jpg
HCST-3.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-5.jpg
HCST-4.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-2.jpg
HCST-5.jpg
HCST-6.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-6.jpg
HCST-8.jpg
HCST-9.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-7.jpg
HCST-10.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-9.jpg
HCST-11.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-1.jpg
HCST-12.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-10.jpg
HCST-13.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-4.jpg
HCST.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-8.jpg
HCST-1.jpg
HCST-2.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-3.jpg
HCST-7.jpg
HCST-3.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-5.jpg
HCST-4.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-2.jpg
HCST-5.jpg
HCST-6.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-6.jpg
HCST-8.jpg
HCST-9.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-7.jpg
HCST-10.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-9.jpg
HCST-11.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-1.jpg
HCST-12.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-10.jpg
HCST-13.jpg
HAGUE-COMPACT-SLIDER-TRIPOD-4.jpg

Hague HCST Camslide Traveller Camera Slider Rail

110.00

Price excludes VAT

The Hague HCST Camslide Traveller is quick and simple to set up, it can be mounted to the video head of any sturdy tripod or placed on a table or the floor for low shots. The camera fastens directly to the carriage, or an optional Ball Levelling Head can be used between the camera and carriage, this enables the camera angle to be adjusted when used on a table or the floor. The usual ideal set up is to mount the track onto the video head of the tripod and the camera onto the carriage. The tripod can then be used in the usual way for pan and tilt with the extra feature of being able to create smooth tracking shots with the Camslide Traveller.

The track has a tripod mounting plate in the centre, with mounting holes for both 1/4" and 3/8" screws, plus a locating hole for the pin found on most tripod camera plates.

Quantity:
Add To Cart

Two track supports are also supplied, one for each end of the track, which support the Camslide track when it is used on a table or the floor and also prevent the carriage from coming off the end of the track.

The Carriage has a 1/4" camera screw to mount the camera to the carriage, or an optional Quick Release Adapter could be used, making it simpler and quicker to mount the camera on & off the carriage. A thumb screw on the side of the carriage locks the carriage to the track when used in a fixed position.

Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track. The track is 500mm ( 19.5" ) long giving a maximum camera movement of 400mm ( 15.5 " ). Suitable for all camcorders and cameras up to 3.5kg.

The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 500mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.125kg.


Related Products