Hague FC Flight Case
Hague FC Flight Case
Price excludes VAT
This touring grade flight case is a professional case made to the highest quality and built to withstand the rigours of the road. It is ideal for a variety of camera supports including some of the Hague Camera jibs (K8, K9, K10, K12, K18).
It has a large single compartment with interlocking tongue and groove edging ensuring that all lids and covers stay secure, even during impact, and form a fully dust proof seal.
It has 9mm hexaboard plywood panels and is fitted with metal tour label dish and label. The heavy duty, industrial grade handles and butterfly catches are great for transporting and all the handles feature heavy duty rubber grips for comfort and non slip safety.
The riveted 35mm aluminium profile edge strips provide rigidity, strength and durability and the heavy duty ball corners offer additional impact protection.
Suitable for Hague jibs such as K8 HDV Boom, K9 Camcrane, K10 Camcrane, K12 Multi Jib and K18 Camcrane but there would also be additional space in the case.
Specifications:
- Internal dimensions: 280 x 1175 x 280mm
- External dimensions (with wheels): 440 x 1250 x 315mm
- External dimensions (without wheels): 330 x 1250 x 315mm
- Weight: 23kg
Related Products
Price excludes VAT
The new Hague K9 Camcrane provides smooth movement from ground level to over 5m in height and is ideal for camera set-ups that weigh up to 2.5kg. This makes it a great camera jib for a variety of cinema cameras, camcorders and DSLR cameras.
The Hague K9 camera jib is quick and easy to set up and can be used at two different lengths. It is supplied with its own adjustable height jib stand and we also offer a tripod bearing block, as an optional extra, for anyone wanting to utilise their own tripod as a base instead.
The K9 camera crane will pan a full 360 degrees on the stand and offers a variable tilt control facility which allows you to tilt the camera up and down when it is attached to the crane. The camera fastens directly to the new camera plate which has been redesigned to offer greater adjustment for DSLR and cinema cameras.
Price excludes VAT
The Hague CamCrane K10 is quick and simple to set up, it is supplied with its own stand and a remote controlled pan & tilt Power Head.
The stand's height is adjustable from 1.1 to 1.4 metres high. Standard bar weights (not supplied) are used for counterbalance, these are held in place by the weight bar and there is an adjustable fine trim weight to obtain perfect balance.
Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You can also pan and tilt the camera on the end of the crane by using the wired remote control.
The distance from the stand to the camera is 2.5 metres and it has a total length of 3.6 metres. It is ideal for all handheld cameras under 2.5kg. An optional monitor bracket is available, this enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.
Price excludes VAT
The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4.5kg (9.9lbs) in weight.
Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity.
Price excludes VAT
The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths.
At it's standard or short length it will support up to 14kg and at it's longest length will support up to 9kg. A 100mm bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm bowl system) or a pan & tilt power head can be used for remote operation.
Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights or sand bags can be used as counterbalance.
The Multi Jib breaks down to just 1.2 metres in length making it very easy to handle and for transport. It is suitable for all handheld cameras and will support a maximum weight of 14kg.