Hague K12 Multi Jib Camera Crane
Hague K12 Multi Jib Camera Crane
Price excludes VAT
The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths.
At it's standard or short length it will support up to 14kg and at it's longest length will support up to 9kg. A 100mm bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm bowl system) or a pan & tilt power head can be used for remote operation.
Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights or sand bags can be used as counterbalance.
The Multi Jib breaks down to just 1.2 metres in length making it very easy to handle and for transport. It is suitable for all handheld cameras and will support a maximum weight of 14kg.
An optional video head, or remote pan & tilt power head, can be fitted to the jib and a monitor bracket is also available making it easier to monitor your shots.
SPECIFICATIONS
SHORT LENGTH - Mode B - Pan Radius 112cm / 44" - Total Length 186cm / 73" - Crane movement 130cm / 51" - Maximum Weight 14kg.
SHORT LENGTH - Mode C - Pan Radius 107cm / 42" - Total Length 186cm / 73" - Crane Movement 120cm / 47" - Maximum Weight 14kg.
STANDARD LENGTH - Mode B - Pan Radius 175cm / 69" - Total Length 285cm / 112" - Crane Movement 254cm / 100" - Maximum Weight 12kg.
STANDARD LENGTH - Mode A - Pan Radius 152cm / 60" - Total Length 285cm / 112" - Crane Movement 196cm / 77" - Maximum Weight 14kg.
LONG LENGTH - Mode A - Pan Radius 262cm / 103" - Total Length 396cm / 155" - Crane Movement 396cm / 155" - Maximum Weight 9kg.
LENGTH - Short is using a single section of the jib. Standard is using two sections and Long is using all three sections.
MODE - There are three pivot positions the jib can be assembled in.
PAN RADIUS - This is the distance from the tripod to camera when the jib is in a horizontal position.
TOTAL LENGTH - This is the length from the weights to camera when the jib is in a horizontal position.
CRANE MOVEMENT - This is the maximum up & down movement, from its lowest position to its highest.
MAXIMUM WEIGHT - This is the maximum combined weight of camera and video head the jib will support.
Suitable for all camera set-ups up to 14kg.
Price includes the Hague K12 Multi jib which can be set up at three different lengths.
Price does not include the tripod, the D3 Jib/Crane Dolly, the camera, the video head, the powerhead, the counterbalance weights, a bag, the D5 Tracking Dolly or any other accessories which may be shown for illustration purposes.
Related Products
Price excludes VAT
The Lilliput 339GL HD monitor is a 7 inch 16:9 LCD field monitor optimised for DSLR camera systems. Using a built in battery pack and a high definition IPS screen this model is the natural successor to the popular 668GL monitor featuring the newest available IPS screen panel for crisp native HD picture on a 7" panel.
7” IPS monitor with widescreen
The Lilliput 339 monitor has an ultra high resolution, widescreen IPS type LCD. This crisp display makes it all the easier to review your data
IPS screen gives 720p native resolution
The 339 features an ultra high native resolution of 1280x800 pixels with intelligent scaling applied when receiving higher resolution HDMI signals. This high resolution gives an extremely detailed image potentially avoiding problems in the post-production environment making it an ideal choice for the discerning professional user.
Price excludes VAT
The Hague D3 Jib Dolly is ideal for Hague Jibs & Cranes K12, K14, K16DV, K18. It can also be used with a K9 and K10 but requires the additional BB Hague Bearing Block.
The Hague Dolly D3 has been designed for use with the Hague range of jibs K12, K14 & K16DV. The three leg frame fastens to the dolly with handwheels, making it quick and simple to set up. The large 100mm individually braked swivel wheels enable the dolly to be moved with ease. The aluminium dolly folds down to 62cm x 16cm for easy transportation.
Suitable for Hague Jibs K12,K14,K16DV
Height -110cm.
Weight - 8kg.
Price includes:- Dolly with 100mm dia. Swivel Wheels, Three leg stand.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
The Hague PH200 Pro Remote Pan & Tilt Power Head can be mounted to a tripod, jib, crane or wall bracket. It can be mounted vertically or underslung and it supports up to 5kg making it ideal for most professional handheld camcorders and DSLR cameras.
The head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors with belt drive. The power head's drive pulleys have sealed radial ball bearings for effortless smooth movement with minimum backlash. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate.
The head's camera plate is adjustable for different sizes of camera and will support up to 5kg. The speed of movement is variable, from the slowest crawl up to 52 degrees per second. The drive motors are quiet at low speeds, but will be heard at higher speeds if the camera's onboard microphone is used. (Similar to most power heads on the market).
Price excludes VAT
The Hague D8CB additional 100mm Claw Ball Leveller enables a ladder to be suspended between two tripods if used with the D8 Ladder Dolly. This claw ball is also ideal for attaching the PH200 Pro Powerhead to the K12 Multi Jib.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
The Hague 3 leg clamps help prevent the leg slipping when a Jib/Crane or any other heavy item is mounted to the tripod. The clamps also have a 1/4" threaded mounting hole to attach an articulated arm, on which can be mounted a monitor or other accessory, to the tripod.
The clamp is fastened to the top section of a twin legged tripod and secured just above the tripods leg clamp once the height has been set, this prevents the leg slipping. The bottom section of the tripod is left in its lowest position so that the bottom section cannot move. This then allows the tripod to support more weight without the legs slipping. The tripod must have a mid or floor/ground spreader, or be mounted to a dolly to prevent the legs spreading outwards.
Suitable for Manfrotto Tripod Legs 546 / 545 / 542 / 525 / 520 / 515 / 500. plus other tripods with twin leg top sections that are 90mm apart and are 14-16mm in diameter.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
The Hague Stepper Ring allows you to convert a 100mm bowl to a 75mm bowl. A lot of video heads now use the 75mm system and this useful stepper ring allows you to step down from 100mm to 75mm. The ring literally sits within the 100mm bowl, converting it to a 75mm size. This then allows you to accept a head with a 75mm half ball.
Ideal for use with product using a 100mm bowl such as the Hague K12 Multi Jib.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
This touring grade flight case is a professional case made to the highest quality and built to withstand the rigours of the road. It is ideal for a variety of camera supports including some of the Hague Camera jibs (K8, K9, K10, K12, K18).
It has a large single compartment with interlocking tongue and groove edging ensuring that all lids and covers stay secure, even during impact, and form a fully dust proof seal.
It has 9mm hexaboard plywood panels and is fitted with metal tour label dish and label. The heavy duty, industrial grade handles and butterfly catches are great for transporting and all the handles feature heavy duty rubber grips for comfort and non slip safety.
Price excludes VAT
The Hague MB/A monitor bracket is suitable for the following Hague Jibs & Cranes K2/K9/K10/K11/K12/K14/K16DV/K18. For LCD monitors with a single 1/4" fixing hole in the base.
Price excludes VAT
The Hague 75mm Bowl can be used to replace the 100mm Bowl used on several of our products. This enables a video head with a 75mm levelling system to be used without the need of a stepper ring.
Suitable for products such as our 100mm Bowl Mounts LH100, CBM, BMS, BM, THM, BM100. Dollies HTD, D2, D7, D8. Jibs K12, K14.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
The Hague monitor and control box mounting bracket enables a monitor and the Hague PH100 or PH200 power head control box to be mounted to the Hague Jibs and Cranes K12/K14/K18. The bracket also has a mounting bar to accept a pan bar remote to control the functions of the camera.
Price includes:- MB/AD Monitor and Control Mounting Box bracket. Price does not include the joystick remote, lanc remote or any of the other accessories shown.