Price excludes VAT

The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths.

At it's standard or short length it will support up to 14kg and at it's longest length will support up to 9kg. A 100mm bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm bowl system) or a pan & tilt power head can be used for remote operation.

Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights or sand bags can be used as counterbalance. 

The Multi Jib breaks down to just 1.2 metres in length making it very easy to handle and for transport. It is suitable for all handheld cameras and will support a maximum weight of 14kg. 

Price excludes VAT

The Hague PH200 Pro Remote Pan & Tilt Power Head can be mounted to a tripod, jib, crane or wall bracket. It can be mounted vertically or underslung and it supports up to 5kg making it ideal for most professional handheld camcorders and DSLR cameras.

The head will pan and tilt through 360 degrees, this enables the camera to point directly upwards or downwards when required. It is driven by two custom-geared motors with belt drive. The power head's drive pulleys have sealed radial ball bearings for effortless smooth movement with minimum backlash. The motor drive can be easily disengaged to enable the camera to be balanced correctly on the camera plate.

The head's camera plate is adjustable for different sizes of camera and will support up to 5kg. The speed of movement is variable, from the slowest crawl up to 52 degrees per second. The drive motors are quiet at low speeds, but will be heard at higher speeds if the camera's onboard microphone is used. (Similar to most power heads on the market).