Price excludes VAT

The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths.

At it's standard or short length it will support up to 14kg and at it's longest length will support up to 9kg. A 100mm bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm bowl system) or a pan & tilt power head can be used for remote operation.

Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights or sand bags can be used as counterbalance. 

The Multi Jib breaks down to just 1.2 metres in length making it very easy to handle and for transport. It is suitable for all handheld cameras and will support a maximum weight of 14kg. 

Price excludes VAT

The Hague BM 100mm Bowl Mount gives a rigid platform onto which you can attach your video head.

Suitable for 100mm bowl type tripod heads or 75mm bowl type tripod heads when used with the optional extra SR Stepper Ring. The BM Bowl Mount has two 5/8" spigots on the bottom which allows it the be attached to items with a 5/8" socket, such as a Superclamp (not included) as shown in some pictures.

Colour black. Supports up to 16kg.

Price includes:- BM Bowl Mount. Price does not include any superclamps. 

Designed and manufactured by Hague Camera Supports | Nottingham | England

Price excludes VAT

The Hague THM Twin Head Camera Mount enables two video heads to be mounted to one tripod, making it ideal for a two camera shoot where space is limited. One operator can use one camera for a “wide shot” while using the main camera to follow the action.

With both cameras being so close together the operator can use the flip out screens on the cameras to monitor both shots. This makes it ideal for stage shows, conferences and weddings.

The mount will attach to any pro tripod with a 100mm or 75mm bowl. It has a 100mm bowl at either end making it easy to “level off” the video heads. The video head from the tripod can be used at one end of the mount and a second head can be mounted to the other end.

Price excludes VAT

The Hague K14 Pro Jib has been designed for use with heavier cameras and will support a maximum weight of 14 kilos.

The telescopic counterbalancing arm uses standard bar weights (not supplied) for counterbalance. All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres.

The Jib is supplied with a 100mm bowl which enables you to use your own video head, a 100mm to 75mm stepper ring is also supplied should you have a 75mm video head. The Pro Jib can be used on any 100/75mm "Bowl type" tripod or a Hague D3/D7 Dolly. 

Price excludes VAT

The Hague 100mm Bowl Mount enables a video head with a 100mm claw ball to be fastened to the mount and it can then be levelled off. At the corners of the triangle plate are 5/8" (16mm) male studs to which Angle Brackets can then be attached.

Designed and manufactured by Hague Camera Supports | Nottingham | England

Price excludes VAT.

The Hague 100mm Bowl Mount with Superclamps can attach to a horizontal pole, roll bar, scaffolding, ladder run, table edge or something similar. 

It is held in position by two superclamps, the jaws of the clamps will attach to a pipe/tube between 12 to 55mm in diameter or to a table/beam with a maximum width of 25mm.

The 100mm. bowl gives a rigid platform onto which you can attach your video head, (an optional stepper ring is available if you are on the 75mm. levelling system and we can also supply video heads if required). It's ideal for use in locations where it is impossible to use a tripod, such as ladders or step ladders to get that high shot or on railings or scaffolding.

Supports up to 16kg.

Price includes:- 100mm Bowl Mount with Two Superclamps.

Designed and manufactured by Hague Camera Supports | Nottingham | England