Hague D3 Jib & Crane Dolly
Hague D3 Jib & Crane Dolly
Price excludes VAT
The Hague D3 Jib Dolly is ideal for Hague Jibs & Cranes K12, K14, K16DV, K18. It can also be used with a K9 and K10 but requires the additional BB Hague Bearing Block.
The Hague Dolly D3 has been designed for use with the Hague range of jibs K12, K14 & K16DV. The three leg frame fastens to the dolly with handwheels, making it quick and simple to set up. The large 100mm individually braked swivel wheels enable the dolly to be moved with ease. The aluminium dolly folds down to 62cm x 16cm for easy transportation.
Suitable for Hague Jibs K12,K14,K16DV
Height -110cm.
Weight - 8kg.
Price includes:- Dolly with 100mm dia. Swivel Wheels, Three leg stand.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Related Products
Price excludes VAT
The Hague K12 Multi Jib fastens to any sturdy tripod with a 100 or 75mm bowl or onto a Hague D3 Dolly. It is quick and simple to set up and can be used at three different lengths.
At it's standard or short length it will support up to 14kg and at it's longest length will support up to 9kg. A 100mm bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm bowl system) or a pan & tilt power head can be used for remote operation.
Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights or sand bags can be used as counterbalance.
The Multi Jib breaks down to just 1.2 metres in length making it very easy to handle and for transport. It is suitable for all handheld cameras and will support a maximum weight of 14kg.
Price excludes VAT
The Hague CamCrane K18 with the joystick controlled PH200 Pro Pan & Tilt Power Head is quick and simple to set up, it attaches to any sturdy 100 or 75mm "bowl type" tripod or can be supplied with the optional Hague Dolly D3. It’s ideal for both handheld camcorders and DSLR cameras up to 4.5kg (9.9lbs) in weight.
Once balanced the camera can smoothly move from ground level to almost 7 metres high and the crane will pan 360 degrees. You have the choice of using the CamCrane at it’s full length or without two of the centre sections. At it's full length support cables are used to improve rigidity.
Price excludes VAT
The Hague K14 Pro Jib has been designed for use with heavier cameras and will support a maximum weight of 14 kilos.
The telescopic counterbalancing arm uses standard bar weights (not supplied) for counterbalance. All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres.
The Jib is supplied with a 100mm bowl which enables you to use your own video head, a 100mm to 75mm stepper ring is also supplied should you have a 75mm video head. The Pro Jib can be used on any 100/75mm "Bowl type" tripod or a Hague D3/D7 Dolly.