Hague D7 Ride On Tracker Camera Dolly System
Hague D7 Ride On Tracker Camera Dolly System
Price excludes VAT
The Hague D7 Tracker is a ride on tracking system that is quick and simple to set up and it enables you to create super smooth tracking shots on location or in the studio. An aluminium frame forms the base of the ride on tracking dolly and attached to this is a telescopic column with a 100mm bowl onto which you can fasten your video head. The Hague range of Jibs can also be attached to this column.
At the base of the column is a swivel seat, which allows you to move around the column when panning. The width of the dolly has been set to allow it to go through doorways. It runs on 50mm diameter track which is held in position by the 8 radial ball bearing wheels which make the dolly easy to move along the track using the handle supplied. A unique levelling system prevents any rocking should the track be laid on uneven ground.
Included in this kit are 6 x 2 metre lengths of track with connectors which provides a 6 metre run. Extra track and connectors are available if required.
Column height 110cm max. 72cm min.
Dolly size 98cm x 68cm x 9cm.
Weight 16kg.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Related Products
Price excludes VAT
Extra track for Hague D7 Tracker. Set of two 2m lengths.
Price excludes VAT
The Hague Stepper Ring allows you to convert a 100mm bowl to a 75mm bowl. A lot of video heads now use the 75mm system and this useful stepper ring allows you to step down from 100mm to 75mm. The ring literally sits within the 100mm bowl, converting it to a 75mm size. This then allows you to accept a head with a 75mm half ball.
Ideal for use with product using a 100mm bowl such as the Hague K12 Multi Jib.
Designed and manufactured by Hague Camera Supports | Nottingham | England
Price excludes VAT
Extra connectors for Hague D7 Tracker.
Set of two.
Designed and manufactured by Hague Camera Supports | Nottingham | England